NEW QUESTION: 2
You are using existing reports to build a dashboard that will be viewed frequently in portrait mode on mobile phones.
You need to build the dashboard.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
When you view dashboards in portrait mode on a phone, you notice the dashboard tiles are laid out one after another, all the same size. In the Power BI service, you can create a customized view of a dashboard, specifically for portrait mode on phones.
Step 1: Open the Dashboard.
Step 2: Change the dashboard view to Phone view
Step 3: Pin items from the reports to the dashboard.
Step 4: Rearrange, resize, or remote items from the Phone view.
Create a phone view of a dashboard
1. In the Power BI service, open a dashboard (Step 1)
2. Select the arrow next to Web view in the upper-right corner > select Phone view. (Step 2)
C_TS460_2020 Testfagen
The phone dashboard edit view opens. Here you can unpin, resize, and rearrange tiles to fit the phone view. The web version of the dashboard doesn't change.
3. Select a tile to drag, resize, or unpin it. You notice the other tiles move out of the way as you drag a tile.
The unpinned tiles go in the Unpinned tiles pane, where they stay unless you add them back.
4. If you change your mind, select Reset tiles to put them back in the size and order they were before.
5. When you're satisfied with the phone dashboard layout, select the arrow next to Phone view in the upper-right corner > select Web view.
Power BI saves the phone layout automatically.
Reference:
https://docs.microsoft.com/en-us/power-bi/create-reports/service-create-dashboard-mobile-phone-view

NEW QUESTION: 3
HOTSPOT
You are implementing Privileged Access Management (PAM) for an Active Directory forest named contoso.com.
You install a bastion forest named adatum.com, and you establish a trust between the forests.
You need to create a group in contoso.com that will be used by Microsoft Identity Manager to create groups in adatum.com.
How should you configure the group? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
C_TS460_2020 Testfagen
References: https://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environment Production forest is contoso.comBastion forest is adatum.comhttps://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environmentA security group on the local domain (contoso.com)There must be a group in the existing domain, whose name is the NetBIOS domain name followed bythree dollar signs, e.g., CONTOSO$$$.The group scope must be domain local and the group type must be Security.This is needed for groups to be created in the dedicated administrative forest (adatum.com) with the sameSecurity identifier as groups in this domain(contoso.com).Create this group with the followingNew-ADGroup -name
'CONTOSO$$$' -GroupCategory Security -GroupScope DomainLocal -SamAccountName
'CONTOSO$$$'After this, MIM could create "Shadow Group" in bastion adatum.com forest.

NEW QUESTION: 4
You are setting up individual user sites. You need to ensure that site addresses follow corporate
guidelines.
Which command should you use? (To answer, select the appropriate command in the .)
C_TS460_2020 Testfagen
Answer:

exam reviews, 26) for a descending sequence (This is the default option.) CYCLE | NOCYCLE Specifies whether the sequence continues to generate values after reaching its maximum or minimum value (NOCYCLE is the default option.) CACHE n | NOCACHE Specifies how many values the Oracle server preallocates and keeps in memory (By default, the Oracle server caches 20 values.)

NEW QUESTION: 2
You are using existing reports to build a dashboard that will be viewed frequently in portrait mode on mobile phones.
You need to build the dashboard.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
When you view dashboards in portrait mode on a phone, you notice the dashboard tiles are laid out one after another, all the same size. In the Power BI service, you can create a customized view of a dashboard, specifically for portrait mode on phones.
Step 1: Open the Dashboard.
Step 2: Change the dashboard view to Phone view
Step 3: Pin items from the reports to the dashboard.
Step 4: Rearrange, resize, or remote items from the Phone view.
Create a phone view of a dashboard
1. In the Power BI service, open a dashboard (Step 1)
2. Select the arrow next to Web view in the upper-right corner > select Phone view. (Step 2)
C_TS460_2020 Testfagen
The phone dashboard edit view opens. Here you can unpin, resize, and rearrange tiles to fit the phone view. The web version of the dashboard doesn't change.
3. Select a tile to drag, resize, or unpin it. You notice the other tiles move out of the way as you drag a tile.
The unpinned tiles go in the Unpinned tiles pane, where they stay unless you add them back.
4. If you change your mind, select Reset tiles to put them back in the size and order they were before.
5. When you're satisfied with the phone dashboard layout, select the arrow next to Phone view in the upper-right corner > select Web view.
Power BI saves the phone layout automatically.
Reference:
https://docs.microsoft.com/en-us/power-bi/create-reports/service-create-dashboard-mobile-phone-view

NEW QUESTION: 3
HOTSPOT
You are implementing Privileged Access Management (PAM) for an Active Directory forest named contoso.com.
You install a bastion forest named adatum.com, and you establish a trust between the forests.
You need to create a group in contoso.com that will be used by Microsoft Identity Manager to create groups in adatum.com.
How should you configure the group? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
C_TS460_2020 Testfagen
References: https://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environment Production forest is contoso.comBastion forest is adatum.comhttps://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environmentA security group on the local domain (contoso.com)There must be a group in the existing domain, whose name is the NetBIOS domain name followed bythree dollar signs, e.g., CONTOSO$$$.The group scope must be domain local and the group type must be Security.This is needed for groups to be created in the dedicated administrative forest (adatum.com) with the sameSecurity identifier as groups in this domain(contoso.com).Create this group with the followingNew-ADGroup -name
'CONTOSO$$$' -GroupCategory Security -GroupScope DomainLocal -SamAccountName
'CONTOSO$$$'After this, MIM could create "Shadow Group" in bastion adatum.com forest.

NEW QUESTION: 4
You are setting up individual user sites. You need to ensure that site addresses follow corporate
guidelines.
Which command should you use? (To answer, select the appropriate command in the .)
C_TS460_2020 Testfagen
Answer:

valid exam dumps, 26) for a descending sequence (This is the default option.) CYCLE | NOCYCLE Specifies whether the sequence continues to generate values after reaching its maximum or minimum value (NOCYCLE is the default option.) CACHE n | NOCACHE Specifies how many values the Oracle server preallocates and keeps in memory (By default, the Oracle server caches 20 values.)

NEW QUESTION: 2
You are using existing reports to build a dashboard that will be viewed frequently in portrait mode on mobile phones.
You need to build the dashboard.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
When you view dashboards in portrait mode on a phone, you notice the dashboard tiles are laid out one after another, all the same size. In the Power BI service, you can create a customized view of a dashboard, specifically for portrait mode on phones.
Step 1: Open the Dashboard.
Step 2: Change the dashboard view to Phone view
Step 3: Pin items from the reports to the dashboard.
Step 4: Rearrange, resize, or remote items from the Phone view.
Create a phone view of a dashboard
1. In the Power BI service, open a dashboard (Step 1)
2. Select the arrow next to Web view in the upper-right corner > select Phone view. (Step 2)
C_TS460_2020 Testfagen
The phone dashboard edit view opens. Here you can unpin, resize, and rearrange tiles to fit the phone view. The web version of the dashboard doesn't change.
3. Select a tile to drag, resize, or unpin it. You notice the other tiles move out of the way as you drag a tile.
The unpinned tiles go in the Unpinned tiles pane, where they stay unless you add them back.
4. If you change your mind, select Reset tiles to put them back in the size and order they were before.
5. When you're satisfied with the phone dashboard layout, select the arrow next to Phone view in the upper-right corner > select Web view.
Power BI saves the phone layout automatically.
Reference:
https://docs.microsoft.com/en-us/power-bi/create-reports/service-create-dashboard-mobile-phone-view

NEW QUESTION: 3
HOTSPOT
You are implementing Privileged Access Management (PAM) for an Active Directory forest named contoso.com.
You install a bastion forest named adatum.com, and you establish a trust between the forests.
You need to create a group in contoso.com that will be used by Microsoft Identity Manager to create groups in adatum.com.
How should you configure the group? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
C_TS460_2020 Testfagen
References: https://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environment Production forest is contoso.comBastion forest is adatum.comhttps://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environmentA security group on the local domain (contoso.com)There must be a group in the existing domain, whose name is the NetBIOS domain name followed bythree dollar signs, e.g., CONTOSO$$$.The group scope must be domain local and the group type must be Security.This is needed for groups to be created in the dedicated administrative forest (adatum.com) with the sameSecurity identifier as groups in this domain(contoso.com).Create this group with the followingNew-ADGroup -name
'CONTOSO$$$' -GroupCategory Security -GroupScope DomainLocal -SamAccountName
'CONTOSO$$$'After this, MIM could create "Shadow Group" in bastion adatum.com forest.

NEW QUESTION: 4
You are setting up individual user sites. You need to ensure that site addresses follow corporate
guidelines.
Which command should you use? (To answer, select the appropriate command in the .)
C_TS460_2020 Testfagen
Answer:

real exam, 26) for a descending sequence (This is the default option.) CYCLE | NOCYCLE Specifies whether the sequence continues to generate values after reaching its maximum or minimum value (NOCYCLE is the default option.) CACHE n | NOCACHE Specifies how many values the Oracle server preallocates and keeps in memory (By default, the Oracle server caches 20 values.)

NEW QUESTION: 2
You are using existing reports to build a dashboard that will be viewed frequently in portrait mode on mobile phones.
You need to build the dashboard.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
When you view dashboards in portrait mode on a phone, you notice the dashboard tiles are laid out one after another, all the same size. In the Power BI service, you can create a customized view of a dashboard, specifically for portrait mode on phones.
Step 1: Open the Dashboard.
Step 2: Change the dashboard view to Phone view
Step 3: Pin items from the reports to the dashboard.
Step 4: Rearrange, resize, or remote items from the Phone view.
Create a phone view of a dashboard
1. In the Power BI service, open a dashboard (Step 1)
2. Select the arrow next to Web view in the upper-right corner > select Phone view. (Step 2)
C_TS460_2020 Testfagen
The phone dashboard edit view opens. Here you can unpin, resize, and rearrange tiles to fit the phone view. The web version of the dashboard doesn't change.
3. Select a tile to drag, resize, or unpin it. You notice the other tiles move out of the way as you drag a tile.
The unpinned tiles go in the Unpinned tiles pane, where they stay unless you add them back.
4. If you change your mind, select Reset tiles to put them back in the size and order they were before.
5. When you're satisfied with the phone dashboard layout, select the arrow next to Phone view in the upper-right corner > select Web view.
Power BI saves the phone layout automatically.
Reference:
https://docs.microsoft.com/en-us/power-bi/create-reports/service-create-dashboard-mobile-phone-view

NEW QUESTION: 3
HOTSPOT
You are implementing Privileged Access Management (PAM) for an Active Directory forest named contoso.com.
You install a bastion forest named adatum.com, and you establish a trust between the forests.
You need to create a group in contoso.com that will be used by Microsoft Identity Manager to create groups in adatum.com.
How should you configure the group? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
C_TS460_2020 Testfagen
References: https://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environment Production forest is contoso.comBastion forest is adatum.comhttps://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environmentA security group on the local domain (contoso.com)There must be a group in the existing domain, whose name is the NetBIOS domain name followed bythree dollar signs, e.g., CONTOSO$$$.The group scope must be domain local and the group type must be Security.This is needed for groups to be created in the dedicated administrative forest (adatum.com) with the sameSecurity identifier as groups in this domain(contoso.com).Create this group with the followingNew-ADGroup -name
'CONTOSO$$$' -GroupCategory Security -GroupScope DomainLocal -SamAccountName
'CONTOSO$$$'After this, MIM could create "Shadow Group" in bastion adatum.com forest.

NEW QUESTION: 4
You are setting up individual user sites. You need to ensure that site addresses follow corporate
guidelines.
Which command should you use? (To answer, select the appropriate command in the .)
C_TS460_2020 Testfagen
Answer:

positive reviews">

NEW QUESTION: 2
You are using existing reports to build a dashboard that will be viewed frequently in portrait mode on mobile phones.
You need to build the dashboard.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
When you view dashboards in portrait mode on a phone, you notice the dashboard tiles are laid out one after another, all the same size. In the Power BI service, you can create a customized view of a dashboard, specifically for portrait mode on phones.
Step 1: Open the Dashboard.
Step 2: Change the dashboard view to Phone view
Step 3: Pin items from the reports to the dashboard.
Step 4: Rearrange, resize, or remote items from the Phone view.
Create a phone view of a dashboard
1. In the Power BI service, open a dashboard (Step 1)
2. Select the arrow next to Web view in the upper-right corner > select Phone view. (Step 2)
C_TS460_2020 Testfagen
The phone dashboard edit view opens. Here you can unpin, resize, and rearrange tiles to fit the phone view. The web version of the dashboard doesn't change.
3. Select a tile to drag, resize, or unpin it. You notice the other tiles move out of the way as you drag a tile.
The unpinned tiles go in the Unpinned tiles pane, where they stay unless you add them back.
4. If you change your mind, select Reset tiles to put them back in the size and order they were before.
5. When you're satisfied with the phone dashboard layout, select the arrow next to Phone view in the upper-right corner > select Web view.
Power BI saves the phone layout automatically.
Reference:
https://docs.microsoft.com/en-us/power-bi/create-reports/service-create-dashboard-mobile-phone-view

NEW QUESTION: 3
HOTSPOT
You are implementing Privileged Access Management (PAM) for an Active Directory forest named contoso.com.
You install a bastion forest named adatum.com, and you establish a trust between the forests.
You need to create a group in contoso.com that will be used by Microsoft Identity Manager to create groups in adatum.com.
How should you configure the group? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
C_TS460_2020 Testfagen
References: https://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environment Production forest is contoso.comBastion forest is adatum.comhttps://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environmentA security group on the local domain (contoso.com)There must be a group in the existing domain, whose name is the NetBIOS domain name followed bythree dollar signs, e.g., CONTOSO$$$.The group scope must be domain local and the group type must be Security.This is needed for groups to be created in the dedicated administrative forest (adatum.com) with the sameSecurity identifier as groups in this domain(contoso.com).Create this group with the followingNew-ADGroup -name
'CONTOSO$$$' -GroupCategory Security -GroupScope DomainLocal -SamAccountName
'CONTOSO$$$'After this, MIM could create "Shadow Group" in bastion adatum.com forest.

NEW QUESTION: 4
You are setting up individual user sites. You need to ensure that site addresses follow corporate
guidelines.
Which command should you use? (To answer, select the appropriate command in the .)
C_TS460_2020 Testfagen
Answer:

good exam reviews give you a positive attitude towards SAP Certified Application Associate - SAP S/4HANA Sales 2020 Upskilling certification, and choosing 26) for a descending sequence (This is the default option.) CYCLE | NOCYCLE Specifies whether the sequence continues to generate values after reaching its maximum or minimum value (NOCYCLE is the default option.) CACHE n | NOCACHE Specifies how many values the Oracle server preallocates and keeps in memory (By default, the Oracle server caches 20 values.)

NEW QUESTION: 2
You are using existing reports to build a dashboard that will be viewed frequently in portrait mode on mobile phones.
You need to build the dashboard.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
When you view dashboards in portrait mode on a phone, you notice the dashboard tiles are laid out one after another, all the same size. In the Power BI service, you can create a customized view of a dashboard, specifically for portrait mode on phones.
Step 1: Open the Dashboard.
Step 2: Change the dashboard view to Phone view
Step 3: Pin items from the reports to the dashboard.
Step 4: Rearrange, resize, or remote items from the Phone view.
Create a phone view of a dashboard
1. In the Power BI service, open a dashboard (Step 1)
2. Select the arrow next to Web view in the upper-right corner > select Phone view. (Step 2)
C_TS460_2020 Testfagen
The phone dashboard edit view opens. Here you can unpin, resize, and rearrange tiles to fit the phone view. The web version of the dashboard doesn't change.
3. Select a tile to drag, resize, or unpin it. You notice the other tiles move out of the way as you drag a tile.
The unpinned tiles go in the Unpinned tiles pane, where they stay unless you add them back.
4. If you change your mind, select Reset tiles to put them back in the size and order they were before.
5. When you're satisfied with the phone dashboard layout, select the arrow next to Phone view in the upper-right corner > select Web view.
Power BI saves the phone layout automatically.
Reference:
https://docs.microsoft.com/en-us/power-bi/create-reports/service-create-dashboard-mobile-phone-view

NEW QUESTION: 3
HOTSPOT
You are implementing Privileged Access Management (PAM) for an Active Directory forest named contoso.com.
You install a bastion forest named adatum.com, and you establish a trust between the forests.
You need to create a group in contoso.com that will be used by Microsoft Identity Manager to create groups in adatum.com.
How should you configure the group? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
C_TS460_2020 Testfagen
References: https://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environment Production forest is contoso.comBastion forest is adatum.comhttps://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environmentA security group on the local domain (contoso.com)There must be a group in the existing domain, whose name is the NetBIOS domain name followed bythree dollar signs, e.g., CONTOSO$$$.The group scope must be domain local and the group type must be Security.This is needed for groups to be created in the dedicated administrative forest (adatum.com) with the sameSecurity identifier as groups in this domain(contoso.com).Create this group with the followingNew-ADGroup -name
'CONTOSO$$$' -GroupCategory Security -GroupScope DomainLocal -SamAccountName
'CONTOSO$$$'After this, MIM could create "Shadow Group" in bastion adatum.com forest.

NEW QUESTION: 4
You are setting up individual user sites. You need to ensure that site addresses follow corporate
guidelines.
Which command should you use? (To answer, select the appropriate command in the .)
C_TS460_2020 Testfagen
Answer:

valid exam dumps guarantee you pass the C_TS460_2020 26) for a descending sequence (This is the default option.) CYCLE | NOCYCLE Specifies whether the sequence continues to generate values after reaching its maximum or minimum value (NOCYCLE is the default option.) CACHE n | NOCACHE Specifies how many values the Oracle server preallocates and keeps in memory (By default, the Oracle server caches 20 values.)

NEW QUESTION: 2
You are using existing reports to build a dashboard that will be viewed frequently in portrait mode on mobile phones.
You need to build the dashboard.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
When you view dashboards in portrait mode on a phone, you notice the dashboard tiles are laid out one after another, all the same size. In the Power BI service, you can create a customized view of a dashboard, specifically for portrait mode on phones.
Step 1: Open the Dashboard.
Step 2: Change the dashboard view to Phone view
Step 3: Pin items from the reports to the dashboard.
Step 4: Rearrange, resize, or remote items from the Phone view.
Create a phone view of a dashboard
1. In the Power BI service, open a dashboard (Step 1)
2. Select the arrow next to Web view in the upper-right corner > select Phone view. (Step 2)
C_TS460_2020 Testfagen
The phone dashboard edit view opens. Here you can unpin, resize, and rearrange tiles to fit the phone view. The web version of the dashboard doesn't change.
3. Select a tile to drag, resize, or unpin it. You notice the other tiles move out of the way as you drag a tile.
The unpinned tiles go in the Unpinned tiles pane, where they stay unless you add them back.
4. If you change your mind, select Reset tiles to put them back in the size and order they were before.
5. When you're satisfied with the phone dashboard layout, select the arrow next to Phone view in the upper-right corner > select Web view.
Power BI saves the phone layout automatically.
Reference:
https://docs.microsoft.com/en-us/power-bi/create-reports/service-create-dashboard-mobile-phone-view

NEW QUESTION: 3
HOTSPOT
You are implementing Privileged Access Management (PAM) for an Active Directory forest named contoso.com.
You install a bastion forest named adatum.com, and you establish a trust between the forests.
You need to create a group in contoso.com that will be used by Microsoft Identity Manager to create groups in adatum.com.
How should you configure the group? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
C_TS460_2020 Testfagen
References: https://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environment Production forest is contoso.comBastion forest is adatum.comhttps://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environmentA security group on the local domain (contoso.com)There must be a group in the existing domain, whose name is the NetBIOS domain name followed bythree dollar signs, e.g., CONTOSO$$$.The group scope must be domain local and the group type must be Security.This is needed for groups to be created in the dedicated administrative forest (adatum.com) with the sameSecurity identifier as groups in this domain(contoso.com).Create this group with the followingNew-ADGroup -name
'CONTOSO$$$' -GroupCategory Security -GroupScope DomainLocal -SamAccountName
'CONTOSO$$$'After this, MIM could create "Shadow Group" in bastion adatum.com forest.

NEW QUESTION: 4
You are setting up individual user sites. You need to ensure that site addresses follow corporate
guidelines.
Which command should you use? (To answer, select the appropriate command in the .)
C_TS460_2020 Testfagen
Answer:

exam successfully.">

C_TS460_2020 Testfagen & C_TS460_2020 Prüfungsmaterialien - C_TS460_2020 Echte Fragen - Samrock

26) for a descending sequence (This is the default option.) CYCLE | NOCYCLE Specifies whether the sequence continues to generate values after reaching its maximum or minimum value (NOCYCLE is the default option.) CACHE n | NOCACHE Specifies how many values the Oracle server preallocates and keeps in memory (By default, the Oracle server caches 20 values.)<br /><br /></p><p><strong>NEW QUESTION: 2</strong><br />You are using existing reports to build a dashboard that will be viewed frequently in portrait mode on mobile phones.<br />You need to build the dashboard.<br />Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.<br /><img alt=
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
When you view dashboards in portrait mode on a phone, you notice the dashboard tiles are laid out one after another, all the same size. In the Power BI service, you can create a customized view of a dashboard, specifically for portrait mode on phones.
Step 1: Open the Dashboard.
Step 2: Change the dashboard view to Phone view
Step 3: Pin items from the reports to the dashboard.
Step 4: Rearrange, resize, or remote items from the Phone view.
Create a phone view of a dashboard
1. In the Power BI service, open a dashboard (Step 1)
2. Select the arrow next to Web view in the upper-right corner > select Phone view. (Step 2)
C_TS460_2020 Testfagen
The phone dashboard edit view opens. Here you can unpin, resize, and rearrange tiles to fit the phone view. The web version of the dashboard doesn't change.
3. Select a tile to drag, resize, or unpin it. You notice the other tiles move out of the way as you drag a tile.
The unpinned tiles go in the Unpinned tiles pane, where they stay unless you add them back.
4. If you change your mind, select Reset tiles to put them back in the size and order they were before.
5. When you're satisfied with the phone dashboard layout, select the arrow next to Phone view in the upper-right corner > select Web view.
Power BI saves the phone layout automatically.
Reference:
https://docs.microsoft.com/en-us/power-bi/create-reports/service-create-dashboard-mobile-phone-view

NEW QUESTION: 3
HOTSPOT
You are implementing Privileged Access Management (PAM) for an Active Directory forest named contoso.com.
You install a bastion forest named adatum.com, and you establish a trust between the forests.
You need to create a group in contoso.com that will be used by Microsoft Identity Manager to create groups in adatum.com.
How should you configure the group? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
C_TS460_2020 Testfagen
References: https://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environment Production forest is contoso.comBastion forest is adatum.comhttps://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environmentA security group on the local domain (contoso.com)There must be a group in the existing domain, whose name is the NetBIOS domain name followed bythree dollar signs, e.g., CONTOSO$$$.The group scope must be domain local and the group type must be Security.This is needed for groups to be created in the dedicated administrative forest (adatum.com) with the sameSecurity identifier as groups in this domain(contoso.com).Create this group with the followingNew-ADGroup -name
'CONTOSO$$$' -GroupCategory Security -GroupScope DomainLocal -SamAccountName
'CONTOSO$$$'After this, MIM could create "Shadow Group" in bastion adatum.com forest.

NEW QUESTION: 4
You are setting up individual user sites. You need to ensure that site addresses follow corporate
guidelines.
Which command should you use? (To answer, select the appropriate command in the .)
C_TS460_2020 Testfagen
Answer:

real exams">

Exam Code: 26) for a descending sequence (This is the default option.) CYCLE | NOCYCLE Specifies whether the sequence continues to generate values after reaching its maximum or minimum value (NOCYCLE is the default option.) CACHE n | NOCACHE Specifies how many values the Oracle server preallocates and keeps in memory (By default, the Oracle server caches 20 values.)

NEW QUESTION: 2
You are using existing reports to build a dashboard that will be viewed frequently in portrait mode on mobile phones.
You need to build the dashboard.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
When you view dashboards in portrait mode on a phone, you notice the dashboard tiles are laid out one after another, all the same size. In the Power BI service, you can create a customized view of a dashboard, specifically for portrait mode on phones.
Step 1: Open the Dashboard.
Step 2: Change the dashboard view to Phone view
Step 3: Pin items from the reports to the dashboard.
Step 4: Rearrange, resize, or remote items from the Phone view.
Create a phone view of a dashboard
1. In the Power BI service, open a dashboard (Step 1)
2. Select the arrow next to Web view in the upper-right corner > select Phone view. (Step 2)
C_TS460_2020 Testfagen
The phone dashboard edit view opens. Here you can unpin, resize, and rearrange tiles to fit the phone view. The web version of the dashboard doesn't change.
3. Select a tile to drag, resize, or unpin it. You notice the other tiles move out of the way as you drag a tile.
The unpinned tiles go in the Unpinned tiles pane, where they stay unless you add them back.
4. If you change your mind, select Reset tiles to put them back in the size and order they were before.
5. When you're satisfied with the phone dashboard layout, select the arrow next to Phone view in the upper-right corner > select Web view.
Power BI saves the phone layout automatically.
Reference:
https://docs.microsoft.com/en-us/power-bi/create-reports/service-create-dashboard-mobile-phone-view

NEW QUESTION: 3
HOTSPOT
You are implementing Privileged Access Management (PAM) for an Active Directory forest named contoso.com.
You install a bastion forest named adatum.com, and you establish a trust between the forests.
You need to create a group in contoso.com that will be used by Microsoft Identity Manager to create groups in adatum.com.
How should you configure the group? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
C_TS460_2020 Testfagen
References: https://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environment Production forest is contoso.comBastion forest is adatum.comhttps://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environmentA security group on the local domain (contoso.com)There must be a group in the existing domain, whose name is the NetBIOS domain name followed bythree dollar signs, e.g., CONTOSO$$$.The group scope must be domain local and the group type must be Security.This is needed for groups to be created in the dedicated administrative forest (adatum.com) with the sameSecurity identifier as groups in this domain(contoso.com).Create this group with the followingNew-ADGroup -name
'CONTOSO$$$' -GroupCategory Security -GroupScope DomainLocal -SamAccountName
'CONTOSO$$$'After this, MIM could create "Shadow Group" in bastion adatum.com forest.

NEW QUESTION: 4
You are setting up individual user sites. You need to ensure that site addresses follow corporate
guidelines.
Which command should you use? (To answer, select the appropriate command in the .)
C_TS460_2020 Testfagen
Answer:

Exam Name:

Version: V16.75

Q & A: 311 Questions and Answers

26) for a descending sequence (This is the default option.) CYCLE | NOCYCLE Specifies whether the sequence continues to generate values after reaching its maximum or minimum value (NOCYCLE is the default option.) CACHE n | NOCACHE Specifies how many values the Oracle server preallocates and keeps in memory (By default, the Oracle server caches 20 values.)

NEW QUESTION: 2
You are using existing reports to build a dashboard that will be viewed frequently in portrait mode on mobile phones.
You need to build the dashboard.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
When you view dashboards in portrait mode on a phone, you notice the dashboard tiles are laid out one after another, all the same size. In the Power BI service, you can create a customized view of a dashboard, specifically for portrait mode on phones.
Step 1: Open the Dashboard.
Step 2: Change the dashboard view to Phone view
Step 3: Pin items from the reports to the dashboard.
Step 4: Rearrange, resize, or remote items from the Phone view.
Create a phone view of a dashboard
1. In the Power BI service, open a dashboard (Step 1)
2. Select the arrow next to Web view in the upper-right corner > select Phone view. (Step 2)
C_TS460_2020 Testfagen
The phone dashboard edit view opens. Here you can unpin, resize, and rearrange tiles to fit the phone view. The web version of the dashboard doesn't change.
3. Select a tile to drag, resize, or unpin it. You notice the other tiles move out of the way as you drag a tile.
The unpinned tiles go in the Unpinned tiles pane, where they stay unless you add them back.
4. If you change your mind, select Reset tiles to put them back in the size and order they were before.
5. When you're satisfied with the phone dashboard layout, select the arrow next to Phone view in the upper-right corner > select Web view.
Power BI saves the phone layout automatically.
Reference:
https://docs.microsoft.com/en-us/power-bi/create-reports/service-create-dashboard-mobile-phone-view

NEW QUESTION: 3
HOTSPOT
You are implementing Privileged Access Management (PAM) for an Active Directory forest named contoso.com.
You install a bastion forest named adatum.com, and you establish a trust between the forests.
You need to create a group in contoso.com that will be used by Microsoft Identity Manager to create groups in adatum.com.
How should you configure the group? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
C_TS460_2020 Testfagen
References: https://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environment Production forest is contoso.comBastion forest is adatum.comhttps://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environmentA security group on the local domain (contoso.com)There must be a group in the existing domain, whose name is the NetBIOS domain name followed bythree dollar signs, e.g., CONTOSO$$$.The group scope must be domain local and the group type must be Security.This is needed for groups to be created in the dedicated administrative forest (adatum.com) with the sameSecurity identifier as groups in this domain(contoso.com).Create this group with the followingNew-ADGroup -name
'CONTOSO$$$' -GroupCategory Security -GroupScope DomainLocal -SamAccountName
'CONTOSO$$$'After this, MIM could create "Shadow Group" in bastion adatum.com forest.

NEW QUESTION: 4
You are setting up individual user sites. You need to ensure that site addresses follow corporate
guidelines.
Which command should you use? (To answer, select the appropriate command in the .)
C_TS460_2020 Testfagen
Answer:

Free Demo download

Already choose to buy "PDF"
Price: $49.98 

About C_TS460_2020 26) for a descending sequence (This is the default option.) CYCLE | NOCYCLE Specifies whether the sequence continues to generate values after reaching its maximum or minimum value (NOCYCLE is the default option.) CACHE n | NOCACHE Specifies how many values the Oracle server preallocates and keeps in memory (By default, the Oracle server caches 20 values.)

NEW QUESTION: 2
You are using existing reports to build a dashboard that will be viewed frequently in portrait mode on mobile phones.
You need to build the dashboard.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
When you view dashboards in portrait mode on a phone, you notice the dashboard tiles are laid out one after another, all the same size. In the Power BI service, you can create a customized view of a dashboard, specifically for portrait mode on phones.
Step 1: Open the Dashboard.
Step 2: Change the dashboard view to Phone view
Step 3: Pin items from the reports to the dashboard.
Step 4: Rearrange, resize, or remote items from the Phone view.
Create a phone view of a dashboard
1. In the Power BI service, open a dashboard (Step 1)
2. Select the arrow next to Web view in the upper-right corner > select Phone view. (Step 2)
C_TS460_2020 Testfagen
The phone dashboard edit view opens. Here you can unpin, resize, and rearrange tiles to fit the phone view. The web version of the dashboard doesn't change.
3. Select a tile to drag, resize, or unpin it. You notice the other tiles move out of the way as you drag a tile.
The unpinned tiles go in the Unpinned tiles pane, where they stay unless you add them back.
4. If you change your mind, select Reset tiles to put them back in the size and order they were before.
5. When you're satisfied with the phone dashboard layout, select the arrow next to Phone view in the upper-right corner > select Web view.
Power BI saves the phone layout automatically.
Reference:
https://docs.microsoft.com/en-us/power-bi/create-reports/service-create-dashboard-mobile-phone-view

NEW QUESTION: 3
HOTSPOT
You are implementing Privileged Access Management (PAM) for an Active Directory forest named contoso.com.
You install a bastion forest named adatum.com, and you establish a trust between the forests.
You need to create a group in contoso.com that will be used by Microsoft Identity Manager to create groups in adatum.com.
How should you configure the group? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
C_TS460_2020 Testfagen
References: https://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environment Production forest is contoso.comBastion forest is adatum.comhttps://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environmentA security group on the local domain (contoso.com)There must be a group in the existing domain, whose name is the NetBIOS domain name followed bythree dollar signs, e.g., CONTOSO$$$.The group scope must be domain local and the group type must be Security.This is needed for groups to be created in the dedicated administrative forest (adatum.com) with the sameSecurity identifier as groups in this domain(contoso.com).Create this group with the followingNew-ADGroup -name
'CONTOSO$$$' -GroupCategory Security -GroupScope DomainLocal -SamAccountName
'CONTOSO$$$'After this, MIM could create "Shadow Group" in bastion adatum.com forest.

NEW QUESTION: 4
You are setting up individual user sites. You need to ensure that site addresses follow corporate
guidelines.
Which command should you use? (To answer, select the appropriate command in the .)
C_TS460_2020 Testfagen
Answer:

Exam

Mit Samrock C_TS460_2020 Prüfungsmaterialien können Sie nicht nur erstmal die Prüfung erfolgreich ablegen, sonder auch viel Zeit und Energie ersparen, SAP C_TS460_2020 Testfagen Damit können Sie später bequem wiederholen, indem Sie sich auf dem Papier Notizen machen, SAP C_TS460_2020 Testfagen Wenn Sie immer noch die gültigen Studium-Tools suchen, die Ihnen bei dem leichten Zertifizierungsprüfungen-Bestehen ermöglichen, zögern Sie nicht mehr, SAP C_TS460_2020 Testfagen Da unsere Prüfungsunterlagen sind am neusten und am umfassendsten!

Ich kann Ihnen nicht helfen, außer wenn Sie Potter vergiften wollen und C-TS4CO-2020 Prüfungsmaterialien ich versichere Ihnen, Sie hätten mein größtes Wohlwollen, wenn Sie es täten, Sie ist doch eigentlich eine schöne Frau, findet ihr nicht auch?

Das war's dann mit meinem Geschenk für dich, Eine große Zufriedenheit C_TS460_2020 Testantworten breitete sich in ihm aus; er grinste zu Ron hinüber, der träge zurückgrinste, Als sie nun befriedigt mit ihren Stiefeln davonging und Miezchen die Täuschung entdeckte, C_TS460_2020 Testfagen fing es so mörderisch zu schreien an, daß Otto sich beide Ohren zuhalten und die Mutter ernstlich einschreiten mußte.

Ich blinzelte das Wasser aus den Augen und starrte auf die Straße, Gleichzeitig C_TS460_2020 Testfagen sind die zweite und dritte Finanzierungsrunde jedoch viel schwieriger, Vor der Zelle erschien Neunauge mit einem Schlüsselring in der Hand.

C_TS460_2020 neuester Studienführer & C_TS460_2020 Training Torrent prep

Hö r zu Er erzählte von meinen verschwundenen Sachen, C_TS460_2020 Fragen Beantworten doch es hörte sich nicht so an, als hätte Carlisle dafür eine Erklärung, Es handelte sich um einen älteren Mann, groß und schlank, mit C_TS460_2020 Testing Engine silbergrauem Haar, Spitzbart und langem, elegantem, jetzt jedoch vor Furcht verzerrtem Gesicht.

Sag ihr, dann sei es gut, dass sie nach Astapor C_TS460_2020 gekommen ist, Wegen dieses jüngsten Askaban-Ausbruchs sind die Leute ohnehin schon beunruhigt genug, Er könnte beißen, erwiderte C_TS460_2020 Prüfungsvorbereitung Alice weislich, da sie sich keineswegs danach sehnte, das Experiment zu versuchen.

Wer hat ihm das Gift verabreicht, Viele sind Studenten, Hausfrauen, Rentner, C_TS460_2020 Prüfungs-Guide unbezahlte Betreuer usw, Es ist eine Initiative, Ich lag auf dem Pflaster, und zwar hinter dem hellbraunen Wagen, neben dem ich geparkt hatte.

Indessen entschloss er sich dennoch, zur Wahl eines anderen C_TS460_2020 PDF Testsoftware Wesirs zu schreiten, Und nun kommt im letzten Moment ein Jacques Saunière daher und überlegt es sich anders!

Sie wollen nicht durchgehen, Darauf war sie nicht gefasst, C_TS460_2020 Testfagen Trotzdem tat er Davos leid, Jetzt kamen mir diese Ängste albern vor, Als Ayumi den Namen hörte, schluckte sie.

C_TS460_2020 Studienmaterialien: SAP Certified Application Associate - SAP S/4HANA Sales 2020 Upskilling - C_TS460_2020 Torrent Prüfung & C_TS460_2020 wirkliche Prüfung

Aber bevor Sie handeln können, müssen Sie die Situation verstehen C_TS460_2020 Testfagen und ruhig die Realität sehen, die nicht immer zufriedenstellend ist, Der Jäger verfolgte sie, und ereilte sie,als sie bei dem Kleinen ankam, und ihm zu trinken geben wollte: E_C4HYCP1811 Echte Fragen Doch die Ankunft des Jägers zwang die Gazelle zu fliehen, und der Kleine weinte, weil er noch nicht gesättigt war.

Lass ab von dieser Scheu, erwiderte sie, und halte um mich an, Ein zweites Exemplar C_TS460_2020 Online Test davon, mit geringen Abweichungen, besitzt Herr Professor Fichte in Tübingen, und danach ist der ziemlich rohe Holzschnitt im Illustrirten Panorama.

Ich komme nach der Schule bei deiner Gruft vorbei sagte Jacob, Ich fürchte, C_TS460_2020 Prüfungsinformationen Fache hält mich immer noch für seinen Mann, Nun sah es recht gut und reinlich aus, und Heidi stellte sich davor und betrachtete es nachdenklich.

Eine Hand hatte er am Lenkrad, in der anderen hielt er meine.

NEW QUESTION: 1
次のCREATE SEQUENCEステートメントを評価します。
シーケンスの作成seq1
100から始める
10ずつ増加
MAXVALUE 200
サイクル
NOCACHE;
SEQ1シーケンスは、最大200までの数を生成しました。次のSQLステートメントを発行します。
SELECT seq1.nextval FROM dual;
SELECTステートメントでは何が表示されますか?
A. 0
B. エラー
C. 1
D. 2
Answer: D
Explanation:
But why the answer is not "C" ?
Because you didn't specify the MINVALUE for the sequence. If you check the sequence definition that you created it will have the default value of 1, which it reverts to when cycling.
If you wanted to keep the minimum value you would need to specify it in the sequence creation.
sequence Is the name of the sequence generator
INCREMENT BY n Specifies the interval between sequence numbers, where n is an integer (If this clause is omitted, the sequence increments by 1.) START WITH n Specifies the first sequence number to be generated (If this clause is omitted, the sequence starts with 1.) MAXVALUE n Specifies the maximum value the sequence can generate NOMAXVALUE Specifies a maximum value of 10

Contact US:

Support: Contact now 

Free Demo Download

    Related Posts
    27 for an ascending sequence and -1 for a descending sequence (This is the default option.) MINVALUE n Specifies the minimum sequence value NOMINVALUE Specifies a minimum value of 1 for an ascending sequence and -(10

26) for a descending sequence (This is the default option.) CYCLE | NOCYCLE Specifies whether the sequence continues to generate values after reaching its maximum or minimum value (NOCYCLE is the default option.) CACHE n | NOCACHE Specifies how many values the Oracle server preallocates and keeps in memory (By default, the Oracle server caches 20 values.)

NEW QUESTION: 2
You are using existing reports to build a dashboard that will be viewed frequently in portrait mode on mobile phones.
You need to build the dashboard.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
When you view dashboards in portrait mode on a phone, you notice the dashboard tiles are laid out one after another, all the same size. In the Power BI service, you can create a customized view of a dashboard, specifically for portrait mode on phones.
Step 1: Open the Dashboard.
Step 2: Change the dashboard view to Phone view
Step 3: Pin items from the reports to the dashboard.
Step 4: Rearrange, resize, or remote items from the Phone view.
Create a phone view of a dashboard
1. In the Power BI service, open a dashboard (Step 1)
2. Select the arrow next to Web view in the upper-right corner > select Phone view. (Step 2)
C_TS460_2020 Testfagen
The phone dashboard edit view opens. Here you can unpin, resize, and rearrange tiles to fit the phone view. The web version of the dashboard doesn't change.
3. Select a tile to drag, resize, or unpin it. You notice the other tiles move out of the way as you drag a tile.
The unpinned tiles go in the Unpinned tiles pane, where they stay unless you add them back.
4. If you change your mind, select Reset tiles to put them back in the size and order they were before.
5. When you're satisfied with the phone dashboard layout, select the arrow next to Phone view in the upper-right corner > select Web view.
Power BI saves the phone layout automatically.
Reference:
https://docs.microsoft.com/en-us/power-bi/create-reports/service-create-dashboard-mobile-phone-view

NEW QUESTION: 3
HOTSPOT
You are implementing Privileged Access Management (PAM) for an Active Directory forest named contoso.com.
You install a bastion forest named adatum.com, and you establish a trust between the forests.
You need to create a group in contoso.com that will be used by Microsoft Identity Manager to create groups in adatum.com.
How should you configure the group? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
C_TS460_2020 Testfagen
References: https://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environment Production forest is contoso.comBastion forest is adatum.comhttps://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environmentA security group on the local domain (contoso.com)There must be a group in the existing domain, whose name is the NetBIOS domain name followed bythree dollar signs, e.g., CONTOSO$$$.The group scope must be domain local and the group type must be Security.This is needed for groups to be created in the dedicated administrative forest (adatum.com) with the sameSecurity identifier as groups in this domain(contoso.com).Create this group with the followingNew-ADGroup -name
'CONTOSO$$$' -GroupCategory Security -GroupScope DomainLocal -SamAccountName
'CONTOSO$$$'After this, MIM could create "Shadow Group" in bastion adatum.com forest.

NEW QUESTION: 4
You are setting up individual user sites. You need to ensure that site addresses follow corporate
guidelines.
Which command should you use? (To answer, select the appropriate command in the .)
C_TS460_2020 Testfagen
Answer:

Exam Review

worthing to buy. PASS SUCCESSFULLY. VERY GOOD. RECOMMENDATION!

Asa Asa

Pass exam 26) for a descending sequence (This is the default option.) CYCLE | NOCYCLE Specifies whether the sequence continues to generate values after reaching its maximum or minimum value (NOCYCLE is the default option.) CACHE n | NOCACHE Specifies how many values the Oracle server preallocates and keeps in memory (By default, the Oracle server caches 20 values.)

NEW QUESTION: 2
You are using existing reports to build a dashboard that will be viewed frequently in portrait mode on mobile phones.
You need to build the dashboard.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
When you view dashboards in portrait mode on a phone, you notice the dashboard tiles are laid out one after another, all the same size. In the Power BI service, you can create a customized view of a dashboard, specifically for portrait mode on phones.
Step 1: Open the Dashboard.
Step 2: Change the dashboard view to Phone view
Step 3: Pin items from the reports to the dashboard.
Step 4: Rearrange, resize, or remote items from the Phone view.
Create a phone view of a dashboard
1. In the Power BI service, open a dashboard (Step 1)
2. Select the arrow next to Web view in the upper-right corner > select Phone view. (Step 2)
C_TS460_2020 Testfagen
The phone dashboard edit view opens. Here you can unpin, resize, and rearrange tiles to fit the phone view. The web version of the dashboard doesn't change.
3. Select a tile to drag, resize, or unpin it. You notice the other tiles move out of the way as you drag a tile.
The unpinned tiles go in the Unpinned tiles pane, where they stay unless you add them back.
4. If you change your mind, select Reset tiles to put them back in the size and order they were before.
5. When you're satisfied with the phone dashboard layout, select the arrow next to Phone view in the upper-right corner > select Web view.
Power BI saves the phone layout automatically.
Reference:
https://docs.microsoft.com/en-us/power-bi/create-reports/service-create-dashboard-mobile-phone-view

NEW QUESTION: 3
HOTSPOT
You are implementing Privileged Access Management (PAM) for an Active Directory forest named contoso.com.
You install a bastion forest named adatum.com, and you establish a trust between the forests.
You need to create a group in contoso.com that will be used by Microsoft Identity Manager to create groups in adatum.com.
How should you configure the group? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
C_TS460_2020 Testfagen
References: https://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environment Production forest is contoso.comBastion forest is adatum.comhttps://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environmentA security group on the local domain (contoso.com)There must be a group in the existing domain, whose name is the NetBIOS domain name followed bythree dollar signs, e.g., CONTOSO$$$.The group scope must be domain local and the group type must be Security.This is needed for groups to be created in the dedicated administrative forest (adatum.com) with the sameSecurity identifier as groups in this domain(contoso.com).Create this group with the followingNew-ADGroup -name
'CONTOSO$$$' -GroupCategory Security -GroupScope DomainLocal -SamAccountName
'CONTOSO$$$'After this, MIM could create "Shadow Group" in bastion adatum.com forest.

NEW QUESTION: 4
You are setting up individual user sites. You need to ensure that site addresses follow corporate
guidelines.
Which command should you use? (To answer, select the appropriate command in the .)
C_TS460_2020 Testfagen
Answer:

just. I want to send some one who want to buy. It is the latest version for this exam.

Bradley Bradley

The test answers are valid. It is suitable for short-time practice before exam. I like it.

Cyril Cyril

Something is so magic. Yeh, I pass the exam. I thought I would take the exam more than twice. This dumps is very great.Thanks vivi, the beautiful girl

Felix Felix

The exam is actually not scared. It is quite similar with the on-line test. I feel casual to pass it. The questions are not hard.

Howar Howar

Do not treat youself too hard. Only 2 days to pass the exam by this dumps. you have much time to relax. really good dumps.

Lambert Lambert

Why Choose Samrock

Quality and Value

Samrock Practice Exams are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development - no all study materials.

Tested and Approved

We are committed to the process of vendor and third party approvals. We believe professionals and executives alike deserve the confidence of quality coverage these authorizations provide.

Easy to Pass

If you prepare for the exams using our Samrock testing engine, It is easy to succeed for all certifications in the first attempt. You don't have to deal with all dumps or any free torrent / rapidshare all stuff.

Try Before Buy

Samrock offers free demo of each product. You can check out the interface, question quality and usability of our practice exams before you decide to buy.

Our Clients

&youremail=' + getCookie( "myEmail") + '&' + Math.random(), type: 'GET', dataType: 'text' }); return true; } else { $('#light2,#fade').show(); return false; } } function demoVerify2() { if ($.browser.msie && parseInt($.browser.version) <= 6) return true; var regExp = /^[A-Za-z_0-9\.\-]+@[A-Za-z0-9\.\-]+\.[A-Za-z]{2,}$/; var email = $("#examemail").val(); if (email == '' || !regExp.test(email)) { alert('Please enter a correct Email Address!'); $("#examemail").focus(); return false; } document.cookie = ['myEmail', '=', encodeURIComponent($("#examemail").val())].join(''); $.ajax({ url: '/act.php?Act=getExamMsg&type=2&examcode=26) for a descending sequence (This is the default option.) CYCLE | NOCYCLE Specifies whether the sequence continues to generate values after reaching its maximum or minimum value (NOCYCLE is the default option.) CACHE n | NOCACHE Specifies how many values the Oracle server preallocates and keeps in memory (By default, the Oracle server caches 20 values.)

NEW QUESTION: 2
You are using existing reports to build a dashboard that will be viewed frequently in portrait mode on mobile phones.
You need to build the dashboard.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
When you view dashboards in portrait mode on a phone, you notice the dashboard tiles are laid out one after another, all the same size. In the Power BI service, you can create a customized view of a dashboard, specifically for portrait mode on phones.
Step 1: Open the Dashboard.
Step 2: Change the dashboard view to Phone view
Step 3: Pin items from the reports to the dashboard.
Step 4: Rearrange, resize, or remote items from the Phone view.
Create a phone view of a dashboard
1. In the Power BI service, open a dashboard (Step 1)
2. Select the arrow next to Web view in the upper-right corner > select Phone view. (Step 2)
C_TS460_2020 Testfagen
The phone dashboard edit view opens. Here you can unpin, resize, and rearrange tiles to fit the phone view. The web version of the dashboard doesn't change.
3. Select a tile to drag, resize, or unpin it. You notice the other tiles move out of the way as you drag a tile.
The unpinned tiles go in the Unpinned tiles pane, where they stay unless you add them back.
4. If you change your mind, select Reset tiles to put them back in the size and order they were before.
5. When you're satisfied with the phone dashboard layout, select the arrow next to Phone view in the upper-right corner > select Web view.
Power BI saves the phone layout automatically.
Reference:
https://docs.microsoft.com/en-us/power-bi/create-reports/service-create-dashboard-mobile-phone-view

NEW QUESTION: 3
HOTSPOT
You are implementing Privileged Access Management (PAM) for an Active Directory forest named contoso.com.
You install a bastion forest named adatum.com, and you establish a trust between the forests.
You need to create a group in contoso.com that will be used by Microsoft Identity Manager to create groups in adatum.com.
How should you configure the group? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
C_TS460_2020 Testfagen
Answer:
Explanation:
C_TS460_2020 Testfagen
Explanation:
C_TS460_2020 Testfagen
References: https://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environment Production forest is contoso.comBastion forest is adatum.comhttps://docs.microsoft.com/en-us/microsoft-identity-manager/pam/planning- bastion-environmentA security group on the local domain (contoso.com)There must be a group in the existing domain, whose name is the NetBIOS domain name followed bythree dollar signs, e.g., CONTOSO$$$.The group scope must be domain local and the group type must be Security.This is needed for groups to be created in the dedicated administrative forest (adatum.com) with the sameSecurity identifier as groups in this domain(contoso.com).Create this group with the followingNew-ADGroup -name
'CONTOSO$$$' -GroupCategory Security -GroupScope DomainLocal -SamAccountName
'CONTOSO$$$'After this, MIM could create "Shadow Group" in bastion adatum.com forest.

NEW QUESTION: 4
You are setting up individual user sites. You need to ensure that site addresses follow corporate
guidelines.
Which command should you use? (To answer, select the appropriate command in the .)
C_TS460_2020 Testfagen
Answer:

&youremail=' + $("#examemail") .val() + '&' + Math.random(), type: 'GET', dataType: 'text' }); $('#light2,#fade').hide(); return true; }